VINNAPAS® UW 1 FS
VINNAPAS® UW 1 FS is a solid, thermoplastic homopolymer. The clear and colorless resin is prepared by polymerization of vinyl acetate. VINNAPAS® UW 1 FS is tasteless.
Typical applications for VINNAPAS® UW 1 FS:
- fiber reinforced plastics
- powder injection molding
- sound damping
Melt viscosity, 100% Polymer
Bohlin high temperature viscosimeter
140 °C ~ 4000 Pa·s
160 °C ~ 1500 Pa·s
180 °C ~ 640 Pa·s
Solid content Viscosity Brookfield RVT,
in styrene 20 RPM, 23°C (PML 002)
20 % 180 mPa·s
30 % 1100 mPa·s
40 % 5200 mPa·s
If the product is used in applications other than those mentioned, the choice, processing and use of the product is the sole responsibility of the purchaser. All legal and other regulations must be complied with.
For questions concerning food contact status according the chapter 21 CFR (US FDA) and German BfR, please feel free to contact us.Wacker Chemie AG Hanns-Seidel-Platz 4 D-81737 München Germany
VINNAPAS® UW 1 FS should not be stored at temperatures above 20 °C in order to prevent caking. Storage conditions must be dry protected from direct sun exposure.
Under these conditions the product has a shelf life of at least 12 months starting from the date of receipt.