NEXIVA® GP 928
NEXIVA® GP 928 is a flexible dispersible polymer powder based on vinyl acetate, vinyl chloride and ethylene. It is designed as a general binder for a variety of applications in various industries including but not limited to adhesives.
NEXIVA® GP 928 provides the following advantages to the manufacturers:
- Biocide free binder.
- Allows the formulation of powder based products.
- No organic solvents, plasticizers, film forming agents need in formulations, due to low minimum film forming temperature.
- Easier storage, no silo in need
- Low odor.
- No skinning compared to liquid binders.
- Contain a fine mineral filler as an anti-blocking agent.
- Better workability in extreme climatic
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
NEXIVA® GP 928 is recommended as binder for various applications for example liquid or powder based adhesives, due to its adequate binding power and good re-dispersibility in water.
For the production of dry products, NEXIVA® GP 928 can be mixed into the dry mixture. For the production of ready-to-use adhesives, we recommend adding NEXIVA® directly to the mill base, just as is the case with the filler. After the powder is mixed with water, it should ideally be applied immediately. It may be necessary to add biocides to the water-mixed powder if the powder has not been used for a prolonged period of time before application.
25 kg paper bags
During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.
Sales and support
No distributors were found for this product