VINNAPAS® 4019 E is ideally suited for formulating tile adhesives with optimum adhesion to wood and a superior water resistance (ANSI 118.4, ANSI 118.11).


  • VINNAPAS® 4019 E is a copolymer powder of vinyl acetate and ethylene and is dispersible in water.
  • VINNAPAS® 4019 E is a high-quality polymeric binder in the medium Tg range.
  • Is specifically formulated to provide excellent adhesion in multipurpose thin set tile mortars, even at lower polymer modification.
  • Adhesion over plywood using VINNAPAS® 4019 E is excellent as well as adhesion to vitrified tiles.
  • Adhesion after water immersion remains on a high level.
  • VINNAPAS® 4019 E is suitable for formulating compounds of high ultimate strength.

For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 4019 E with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.

For typical application fields of VINNAPAS® 4019 E, refer to the "Application" section.  Please discuss additional applications with your WACKER customer representative.


25 kg paper bags
Big Bags or bulk on request.


During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

Sales and support

Wacker Chemical Corporation
6870 Tilghman St
Allentown, PA 18106-9346
United States
+1  610  336-2700 (Phone)
+1 517 264-4088  (Fax)

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question


My media

My favorites

My products