NEXIVA® GP 122 (ULS)

NEXIVA® GP 122 (ULS) is a soft dispersible polymer powder based on vinyl acetate and ethylene. It is designed as a general binder for a variety of application in various industries such as adhesives and coating but not limited to.



Properties

  • NEXIVA® GP 122 (ULS) provides the following advantages to  manufacturers:

  • Biocide free binder.
  • Allows for the formulation of powder based products.
  • No organic solvents, plasticizers, film forming agents need in formulations.
  • Easier storage, no silo needed.
  • Low odor.
  • No skinning compared to liquid binders.
  • Contains a fine mineral filler as an antiblocking agent.
  • Better workability in extreme climatic conditions.

Data sheets

NEXIVA® GP 122 (ULS) is recommended as binder for various applications for example adhesive, interior architectural paints, intumescent coatings and primers due to its adequate binding power and good re-dispersibility in water.

Processing

For the production of dry products, NEXIVA® GP 122 (ULS) can be mixed into the dry mixture. For the production of ready-to-use paint and coatings, adhesives, primers and paper-coating formulations we recommend adding NEXIVA® directly to the mill base, just as is the case with the filler. After the powder is mixed with water, it should ideally be applied immediately. It may be necessary to add biocides to the water-mixed powder if the powder has not been used for a prolonged period of time before application.

Additional information

If NEXIVA® GP 122 (ULS) is used in applications other than those mentioned, the choice, processing and use of NEXIVA® GP 122 (ULS) is the sole responsibility of the purchaser. All legal and other regulations must be complied with.

Slight color variations of the dispersible polymer powder may occur without impairing the product's functionality.

Packaging

25 kg paper bags

Storage

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

Sales and support

Wacker Chemical Corporation
6870 Tilghman St
Allentown, PA 18106-9346
United States
+1  610  336-2700 (Phone)
+1 517 264-4088  (Fax)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Order

My media


My favorites

My products