WACKER® FG 350

$WACKER<sup>®</sup> FG 350


WACKER® FG 350 is a polydimethylsiloxane obtained by hydrolysis and polycondensation of dichlorodimethylsilane and chlorotrimethylsilane. The degree of polymerization (n) is such that the mean kinematic viscosity is 350mm²/s at 25°C.



Properties

Regulatory status

 

Direct Food additive:
WACKER® FG 350 conforms to FDA 21 CFR § 173.340 "Defoaming Agents" as a Secondary Direct Food Additive
Permitted in Food for Human Consumption." However, no Food Safety Modernization Act (FSMA) compliant program is
implemented for this product.
WACKER® FG 350 is listed in the Regulation (EC) No 1333/2008 Annex II and III as amended by Regulations (EU) Nos
1129/2011 and 1130/2011 as E 900 polydimethylsiloxane. It meets the purity requirements as laid down in Regulation (EU)
No. 231/2012 and is therefore approved as direct food additive within the EC under observance of the use restrictions in
force for polydimethylsiloxane (E 900).
WACKER® FG 350 is certified according to HACCP principles. Hence, it meets the
requirements on food hygiene in accordance with Regulation (EC) No. 852/2004.

 

Food Contact:
WACKER® FG 350 complies with the Recommendation "XV Silicones" of the BfR concerning the manufacture of essential
commodities that have contact with food.
WACKER® FG 350 is listed under PM-Nr. 76721 in Regulation (EU) No. 10/2011 as an additive for plastic materials to
come into contact with food and meets the specifications under column (4) and (10). The product is not subject to a
specific migration limit (SML).

 

WACKER® FG 350 is suitable for use under FDA 21 CFR as follows:

 

§175.105 (ADHESIVES),
§175.300 (RESINOUS AND POLYMERIC COATINGS)
§176.170 (COMPONENTS OF PAPER AND PAPERBOARD IN CONTACT WITH AQUEOUS AND FATTY FOODS)
§176.180 (COMPONENTS OF PAPER AND PAPERBOARD IN CONTACT WITH DRY FOOD)
§176.200 (DEFOAMING AGENTS USED IN COATINGS)
§176.210 (DEFOAMING AGENTS USED IN THE MANUFACTURE OF PAPER AND PAPERBOARD)
§177.1210 (CLOSURES WITH SEALING GASKETS FOR FOOD CONTAINERS). §177.2800 (TEXTILES AND TEXTILE
FIBERS)
§178.3120 (ANIMAL GLUE)
§178.3570 (LUBRICANTS WITH INCIDENTAL FOOD CONTACT)
§178.3910 (SURFACE LUBRICANTS USED IN THE MANUFACTURE OF METALLIC ARTICLES)
§181.28 (RELEASE AGENTS)

 

WACKER® FG 350 meets the criteria for an exemption from the requirements of a tolerance when used as an additive in
pesticide formulations to be applied to growing crops or raw agricultural commodities after harvest as specified in 40 CR
180.960.


National regulations applicable in the countries concerned must be observed.


WACKER® FG 350 is used predominantly to control foam in lipophilic systems (foods rich in oil or fat, e.g. deep-frying oil) or for surface treatment. WACKER® FG 350 also serves as the base material in the production of antifoams compliant with the regulations pertaining to food for human consumption.

Storage


The 'Best use before end' date of each batch is shown on the product label.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Order

My media


My favorites

My products