VINNAPAS® UW 1 FS
VINNAPAS® UW 1 FS is a solid, thermoplastic homopolymer. The clear and colorless resin is prepared by polymerization of vinyl acetate. VINNAPAS® UW 1 FS is tasteless.
Documents
Application details
General
Typical applications for VINNAPAS® UW 1 FS:
- fiber reinforced plastics
- Adhesives
- powder injection molding
- sound damping
Processing
Product data
Melt viscosity, 100% Polymer
Bohlin high temperature viscosimeter
140 °C ~ 4000 Pa·s
160 °C ~ 1500 Pa·s
180 °C ~ 640 Pa·s
Solid content Viscosity Brookfield RVT,
in styrene 20 RPM, 23°C (PML 002)
20 % 180 mPa·s
30 % 1100 mPa·s
40 % 5200 mPa·s
Additional information
If the product is used in applications other than those mentioned, the choice, processing and use of the product is the sole responsibility of the purchaser. All legal and other regulations must be complied with.
Information regarding applicability under specific legislation in the area of food contact can be requested from our account managers and Wacker subsidiaries.
Packaging & Storage
Packaging
VINNAPAS® UW 1 FS is supplied in 25 kg Paper Bags. Big Bag is available on request.Storage
VINNAPAS® UW 1 FS should not be stored at temperatures above 20 °C in order to prevent caking. Storage conditions must be dry protected from direct sun exposure.
Under these conditions the product has a shelf life of at least 12 months starting from the date of receipt.
Sales and support
Dubai Silicon Oasis s/n
0001 Dubai
United Arab Emirates