ELASTOSIL® M 4644 A/B

$ELASTOSIL<sup>®</sup> M 4644 A/B

Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature.

 

Main application: Vacuum casting for rapid prototyping.



Properties

  • good flow
  • fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
  • medium Shore A hardness (approx. 40)
  • good transparency of the cured rubber
  • high tear strength
  • outstanding resistance to casting resins, particularly polyurethanes and epoxies, for very long service life of the molds
  • slightly oil-bleeding

Specific features of ELASTOSIL® M 4644 A/B

  • Addition Curing
  • Excellent mechanical properties
  • Flowable
  • Highly transparent
  • No chemical shrinkage
  • Resistance against PU
  • Slightly oil bleeding
  • Two-component

High-performance silicone mold-making compound which is particularly suitable for reproducing models with undercuts in polyurethane or epoxy resins.


Main field of application: Vacuum casting for rapid prototyping.

Detailed instructions for preparation and use are given in the brochure “Room Temperature Vulcanizing (RTV) Silicones - Material and Processing Guidelines”.

 

Important note:
The platinum catalyst is in component A.


Caution:
A and B components may only be used together if they have the same batch number.

 

Storage

The 'Best use before end' date of each batch is shown on the product label.

 

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemicals (South Asia)
Singapore Science Park II
117525 Singapore
Singapore
+65  6542-6638 (Phone)
+65 6542-6632  (Fax)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Order

My media


My favorites

My products