LUMISIL® 100 OD A/B
LUMISIL® 100 OD A/B is a 2-part silicone gel(1:1) that is specially designed to protect outdoor display from UVA & UVB in sunlight.
Properties
- protect outdoor display from UVA & UVB in sunlight
- Self-leveling with low viscosity
- Fast cure at low temperature
- Good optical performance
- Low shrinkage
Documents
Application details
- Encapsulation of optical & electronic components
- Optical bonding for touch screen panel
- Production of damping elements
Processing
Surface preparation
All surfaces must be clean and free of contaminants that will inhibit the cure of the product
Examples of inhibiting contaminants are sulfer containing materials, plasticizers, urethanes, amine containing materials and organometallic compounds especially organotin compounds.
If a substrate’s ability to inhibit cure is unknown, a small scale test should be run to determine compatibility.
Degassing before Mixing
In mass production, Degassing is essentional process before mixing of materials.
Mixing
Part A : Part B = 1 : 1
Curing
Curing speed can be adjusted by temperature and time. Heat can accelerate curing process.
We recommend running preliminary tests to optimize conditions for particular application.
Packaging & Storage
Storage
The 'Best use before end' date of each batch appears on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable.
In this case, however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
2 Arlington Square, Downshire Way
Bracknell RG12 1WA
United Kingdom
Distributors
WACKER has a global network of specialist distributors at its disposal. Please select an application so that we can suggest suitable contacts.