ELASTOSIL RT 6820 A/B
ELASTOSIL® RT 6820 A/B is a two-component, solventless liquid silicone rubber system that cures rapidly upon heating to a tough silicone rubber. It has been formulated primarily as a low viscosity with good strength for fabric coating.
Properties
• 100% solids
• Good adhesion
• Low viscosity
• Long pot life
Data sheets
ELASTOSIL® RT 6820 A/B is processed by thorough mixing of component A and B in a ratio of 10:1. Pot life at 23°C is around 3 days. The product can be fully cured in about 3 minutes at 150°C, shorter cure time is possible at higher temperature. Adhesion of ELASTOSIL® RT 6820 A/B depends on the substrate and can be improved with additives such as adhesion promoter or primer. Curing may be retarded and prevented by nitrogen compounds such as amines and amides, sulfur compounds, anti-aging additives and other additives in rubbers and plastics. Therefore, material compatibility test is always recommended to determine the optimum curing conditions.
Packaging
ELASTOSIL® RT 6820 A is packaged in 180 Kg drums and ELASTOSIL® RT 6820 B is packaged in 18 Kg pails.
Storage
ELASTOSIL® RT 6820 A/B should be stored between 5 and 30 °C in the tightly closed original container.
The product has shelf life of 18 months when stored in proper conditions. Storage beyond the initial expiration date does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance.
Sales and support
Bracknell RG12 1WA
United Kingdom
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Distributors
WACKER has a global network of specialist distributors at its disposal. Please select an application so that we can suggest suitable contacts.
SM1 4AF Sutton, Surrey
44 208 7707295 (Fax)