ELASTOSIL® R 701/70 OH


Properties

  • Good heat- and reversion-stabilised
  • Excellent resistance to mineral oil
  • Non-post-cure properties:
    The differences in the mechanical properties of post- cured and non-post-cured vulcanizates are only very slight
  • When Curing Agent E is used, blooming of the decomposition products will not occur
  • Good elasticity and low compression set, even when Curing Agent E is used

Specific features of ELASTOSIL® R 701/70 OH

  • Oil resistant
  • Ultra-low compression set

The compounds are recommended for all kinds of seals that come into contact with mineral oils.
ELASTOSIL® R 701/70 OH is used especially when low compression set is crucial for achieving good seal properties. The compounds may also be used for making high quality silicone-rubber-covered rollers.

The raw rubber requires the addition of peroxides for vulcanization at elevated temperatures. A homogeneous incorporation is a must to maintain best processing behavior. Pot life is depending on the used peroxide and storage condition. Please consider the technical data sheet of the corresponding curing agent.

 

ELASTOSIL® R 701/70 OH is suitable for compression, transfer and injection molding and also for making extruded  profiles. 

For detailed information refer to our latest brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".

Packaging

This product is available in 20 kg and 540 kg cardboard packaging.

Special delivery forms are possible but depend on several technical and commercial aspects. Please contact your local sales manager in such cases.

Storage

Please store the cardboard boxes in a dry and cool place. Already opened boxes should be closed again to avoid any contamination.

The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
Germany
+49  711  61942-0 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Order

My media


My favorites

My products