ELASTOSIL® E4
ELASTOSIL® E4 is a non-slump, acetoxy-cure one-component silicone rubber, which cures at room temperature under the influence of atmospheric moisture.
Properties
- acetoxy-cure RTV-1
- Low Shore A hardness
- excellent primerless adhesion to many substrates
- good heat stability: permanent temperatures up to 180°C and peak temperatures up to 200°C
Documents
Application details
Multipurpose sealant and adhesive where low hardness/low modulus is needed for high movement capability
Processing
ELASTOSIL® E4 shows good primerless adhesion to many substrates. We recommend running preliminary tests to optimize conditions for the particular application.
Detailed processing instructions are given in our brochure “ROOM TEMPERATURE VULCANIZING (RTV) SILICONES - MATERIAL AND PROCESSING GUIDELINES
Packaging & Storage
Storage
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
Rua Municipal, 325
06612-060 Jandira
Brazil
Distributors
WACKER has a global network of specialist distributors at its disposal. Please select an application so that we can suggest suitable contacts.
Rua Castor 51
Galpão 4 Cid Sat.S Barbara São Paulo CEP 08340-120
Rua Castor 51
Galpão 4 Cid Sat.S Barbara São Paulo CEP 08340-120