WACKER^® KATALYSATOR EP

WACKER^® KATALYSATOR EP must be added to the mixture of DEHESIVE^®, CRA^® modifier and Crosslinker. During addition, stirring should be as rapid as possible so as to avoid local over-concentrations of the platinum catalyst, which cause premature curing indicated by formation of gel particles ranging in color from brown to black. It is also important that the platinum catalyst always be added as the last component to the homogeneous mixture of polymer and Crosslinker. Suitable materials for mixing vessels, stirrers, pumps, tubes, filters, etc. are stainless steel, polyethylene, polypropylene, Teflon and other fluorine polymers, as well as products coated or lined with these materials. If good catalyst activity is to be maintained, it is essential to avoid deactivation of the platinum catalyst. This may occur as a result of contact with the abovementioned equipment, with the ambient air, with unsuitable rolls in the coating equipment, with the customer's additives, or even with the substrate to be coated. If heavy metals (e.g. lead, copper, zinc, iron, chromium or tin) or sulfurous, nitrogenous or phosphorous organic compounds are present in any of the above materials, curing may be impaired or even prevented.
WACKER^® KATALYSATOR EP is dissolved in a reactive silicone polymer, which is incorporated into the cured rubber during the curing process. Combined with DEHESIVE^® silicone polymers, it is excellently suited for providing various substrates, such as paper and films with a silicone coating that exhibits release properties towards tacky products used in technical, health, hygiene and food sectors.