WACKER® AF 2340
WACKER® AF 2340 is a 40% economical, general purpose micro emulsion with normal yellowing using a high molecular weight amino fluid. Made with AF 23.
WACKER® AF 2340 gives permanent effects even without the addition of a catalyst. Provided no resins are used, specific curing conditions need not be adhered to.
WACKER® AF 2340 can be applied either by padding or by the exhaust method but, as with all products containing silicone, the finishing liquors should not be subjected to high shear, as this might cause instability.
5-30 g/l of WACKER® AF 2340 are recommended for the pad method. For the exhaust method 1-3%, relative to the weight of goods, is adequate and the treatment should be carried out at 40-50°C for 20-20 minutes. The pH of the liquor should not exceed pH 5. It may need to be adjusted with acetic acid.
WACKER® AF 2340 can be applied either alone or together with resins and other finishing agents. If WACKER® AF 2340 is used together with cross-linking agents and other additives, it should be added, in dilute form, after all the other products. (This applies generally to the processing of all polysiloxanes).
Higher crease recovery angles and lower abrasion values can be obtained in resin finishing by using WACKER® AF 2340. A wide range of hands can be obtained by combining WACKER® AF 2340 with conventional softening agents and other additives such as fillers based on polyacrylate.