SILPURAN® 2400/25 A/B


Eigenschaften

  •  Highly biocompatible
  •  No by-products from curing process
  •  Pourable
  •  Low viscosity
  •  2-part, mixing ratio 1:1
  •  Rapid curing at relatively low temperatures
  •  Transluzent vulcanisate

Datenblätter












1 Leerzeile
1 Leerzeile


1 Leerzeile
*


SILPURAN® 2400/25 A/B can be used for flexible moulding applications in prosthetics.

Components A and B of SILPURAN® 2400/25 A/B are delivered ready to use in drums.


The components are mixed homogeneously in an A to B ratio of 1 : 1 and vulcanize rapidly at temperatures over 100°C. In a given application the required curing conditions (temperature and time) will also depend on the size and thickness of the specimen.


The fabricator must carry out preliminary tests to determine the optimum conditions for a particular application.


Detailed instructions for preparation and use are given in the product data sheet “Wacker RTV-2 Silicone Rubber – Processing.”

Important note:
The platinum catalyst is contained in component A.


Caution!
Only A and B components with the same batch number may be processed together!

Lagerung

The 'Best use before end' date of each batch is shown on the product label.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
Deutschland
+49  711  61942-0 (Phone)
+49 711 61942-61  (Fax)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Bestellen

Meine Medien


Meine Favoriten

Meine Produkte