Eigenschaften

  • Low viscosity for dispensing process
  • No oxygen inhibition
  • Low tackiness for easy alignment
  • Excellent transparency
  • Low shrinkage

Spezifische Merkmale von LUMISIL® 203 UV A

  • Additionsvernetzend
  • Fließfähig
  • hochtransparent
  • kein chemischer Schrumpf
  • UV-vernetzend
  • zweikomponentig
  • Optical bonding for touch screen panel
  • Encapsulation of optical & electronic components
  • Production of damping elements

All surfaces must be clean and free of contaminants that will inhibit the cure of the product.

Examples of inhibiting contaminants are sulfur-containing materials, plasticizers, urethanes, amine-containing materials, and organometallic compounds – especially organotin compounds.

If a substrate’s ability to inhibit cure is unknown, a small-scale test should be run to determine compatibility.

Part A : Part B (ELASTOSIL® CAT UV) = 10 : 1

Curing speed can be adjusted by UV power and time. 

Also heating after UV exposure can accelerate curing process.

We recommend running preliminary tests to optimize conditions for particular application.

  • Recommand Lamp type: UV-A (ex. Mercury, Metal Halide etc.), 365 nm LED (If the applies lamp is 365nm LED lamp, the higher UV irradiance would be better)

Lagerung

The 'Best use before end' date of each batch appears on the product label.


Storage beyond the date specif ied on the label does not necessarily mean that the product is no longer usable.

In this case, however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
Deutschland
+49  711  61942-0 (Phone)
+49 711 61942-61  (Fax)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Bestellen

Meine Medien


Meine Favoriten

Meine Produkte