POWERSIL® 460 MH is a ready-to-use, electrically conductive silicone rubber grade for compression moulding. Curing Agent C1 is already incorporated.


Spezifische Merkmale von POWERSIL® 460 MH

  • elektrisch leitfähig

To obtain the optimum electrical properties, it is necessary to post-cure for at least 4 h at 200 °C after vulcanisation. Minimum temperature for crosslinking is 170 °C.


Contact with solvents or oils (also with silicone fluids) should be avoided, as the results in changes of the electrical conductivity.


The 'Best use before end' date of each batch is shown on the product label.


Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
+49  711  61942-0 (Phone)
+49 711 61942-61  (Fax)

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen


Meine Medien

Meine Favoriten

Meine Produkte