ELASTOSIL® R 862/60 OH

Vulcanizates of ELASTOSIL® R 862/60 OH possess particularly good resistance to hot air in combination with several heat stabilizers. The vulcanizates are highly elastic and show extraordinary low compression set.



Eigenschaften

*

Spezifische Merkmale von ELASTOSIL® R 862/60 OH

  • hitzebeständig
  • hohe Rückprallelastizität
  • sehr niedriger Druckverformungsrest

Disclaimer

Alle unsere Angaben beruhen auf bestem Wissen. Allerdings übernehmen wir hierfür keine Haftung oder Gewährleistung und behalten uns jederzeit technische Änderungen vor. Es liegt in der eigenen Verantwortung des Käufers, die Angaben sowie die Geeignetheit unseres Produktes für den vorgesehenen Einsatzzweck vor dem Gebrauch zu überprüfen. Vertragliche Regelungen gehen immer vor. Der Gewährleistungs- und Haftungsausschluss gilt - insbesondere im Ausland - auch im Hinblick auf Schutzrechte Dritter.

ELASTOSIL® R 862/60 OH is a peroxide curing high consistency silicone rubber suitable for the manufacture of molded articles like gaskets and bellows. Vulcanizates provide excellent heat stability by adding appropriate heat stabilizers, such as 1,5% ELASTOSIL® AUX Stabilizer H3 or 3% ELASTOSIL® AUX Stabilizer H1.

To obtain optimum compression set values it is advisable to post-cure articles made of ELASTOSIL® R 862/60 OH for 4 hours at 200°C.
 

The raw rubber requires the addition of peroxides for vulcanization at elevated temperatures. A homogeneous  incorporation is a must, but please avoid temperatures >30°C along the incorporation process in order to maintain best processing behavior. Pot life is depending on the used peroxide and storage condition.

For detailed information please refer to the latest edition of our brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".

Verpackung / Gebinde

This product is available in 20 kg and 540 kg cardboard packaging.

Lagerung

Please store the cardboard boxes in a dry and cool place. Already opened boxes should be closed again to avoid any contamination. The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
Deutschland
+49  711  61942-0 (Phone)
+49 711 61942-61  (Fax)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Sie möchten ein Produktmuster?

Hier können Sie ein Produktmuster anfordern.

Muster anfordern

Mehr Produkte

Produkte Technische Daten
Aussehen Härte Shore A Reißfestigkeit Reißdehnung Weiterreißwiderstand Druckverformungsrest
ELASTOSIL® R 101/25 OH translucent translucent 23[1] 23[1] 7,0 N/mm²[2] 7,0 N/mm²[2] 900 %[3] 900 %[3] 14 N/mm[4] 14 N/mm[4] 13 %[5] 13 %[5]
ELASTOSIL® R 101/35 OH translucent translucent 35[1] 35[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 700 %[3] 700 %[3] 16 N/mm[4] 16 N/mm[4] 10 %[5] 10 %[5]
ELASTOSIL® R 101/45 OH translucent translucent 47[1] 47[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 540 %[3] 540 %[3] 18 N/mm[4] 18 N/mm[4] 10 %[5] 10 %[5]
ELASTOSIL® R 101/65 OH translucent translucent 65[1] 65[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 200 %[3] 200 %[3] 16 N/mm[4] 16 N/mm[4] 10 %[5] 10 %[5]
ELASTOSIL® R 401/10 OH transparent transparent 13[1] 13[1] 6,00 N/mm²[2] 6,00 N/mm²[2] 1200 %[3] 1200 %[3] 24 N/mm[4] 24 N/mm[4] 41 %[5] 41 %[5]
ELASTOSIL® R 401/20 OH transparent transparent 23[1] 23[1] 9,0 N/mm²[2] 9,0 N/mm²[2] 1000 %[3] 1000 %[3] 27 N/mm[4] 27 N/mm[4] 33 %[5] 33 %[5]
ELASTOSIL® R 401/30 OH transparent transparent 34[1] 34[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 720 %[3] 720 %[3] 22 N/mm[4] 22 N/mm[4] 20 %[5] 20 %[5]
ELASTOSIL® R 401/30 S transparent transparent 33[1] 33[1] 10 N/mm²[2] 10 N/mm²[2] 800 %[3] 800 %[3] 24 N/mm[4] 24 N/mm[4] 15 %[5] 15 %[5]
ELASTOSIL® R 401/40 S transparent transparent 41[1] 41[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 730 %[3] 730 %[3] 28 N/mm[4] 28 N/mm[4] 16 %[5] 16 %[5]
ELASTOSIL® R 401/50 S transparent transparent 52[1] 52[1] 12,0 N/mm²[2] 12,0 N/mm²[2] 640 %[3] 640 %[3] 29 N/mm[4] 29 N/mm[4] 17 %[5] 17 %[5]
ELASTOSIL® R 401/55 S transparent transparent 55[1] 55[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 470 %[3] 470 %[3] 23 N/mm[4] 23 N/mm[4] 35 %[5] 35 %[5]
ELASTOSIL® R 401/60 S transparent transparent 62[1] 62[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 530 %[3] 530 %[3] 26 N/mm[4] 26 N/mm[4] 16 %[5] 16 %[5]
ELASTOSIL® R 401/70 S transparent transparent 71[1] 71[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 530 %[3] 530 %[3] 31 N/mm[4] 31 N/mm[4] 22 %[5] 22 %[5]
ELASTOSIL® R 401/80 S transparent transparent 81[1] 81[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 430 %[3] 430 %[3] 26 N/mm[4] 26 N/mm[4] 41 %[5] 41 %[5]
ELASTOSIL® R 401/90 OH transparent transparent 89[1] 89[1] 7,4 N/mm²[2] 7,4 N/mm²[2] 160 %[3] 160 %[3] 14 N/mm[4] 14 N/mm[4] 19 %[5] 19 %[5]
ELASTOSIL® R 416/70 MH - - 70[1] 70[1] 11,3 N/mm²[2] 11,3 N/mm²[2] 580 %[3] 580 %[3] 32 N/mm[4] 32 N/mm[4] 20 %[5] 20 %[5]
ELASTOSIL® R 420/30 OH transparent transparent 29[1] 29[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 930 %[3] 930 %[3] 33 N/mm[4] 33 N/mm[4] 18 %[5] 18 %[5]
ELASTOSIL® R 420/40 S transparent transparent 43[1] 43[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 800 %[3] 800 %[3] 37 N/mm[4] 37 N/mm[4] 24 %[5] 24 %[5]
ELASTOSIL® R 420/50 S transparent transparent 53[1] 53[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 730 %[3] 730 %[3] 41 N/mm[4] 41 N/mm[4] 23 %[5] 23 %[5]
ELASTOSIL® R 420/60 S transparent transparent 62[1] 62[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 660 %[3] 660 %[3] 43 N/mm[4] 43 N/mm[4] 25 %[5] 25 %[5]
ELASTOSIL® R 420/70 S transparent transparent 72[1] 72[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 570 %[3] 570 %[3] 45 N/mm[4] 45 N/mm[4] 38 %[5] 38 %[5]
ELASTOSIL® R 490/55 OH transparent transparent 53[1] 53[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 520 %[3] 520 %[3] 30 N/mm[4] 30 N/mm[4] 28 %[5] 28 %[5]
ELASTOSIL® R 701/40 S opaque opaque 40[1] 40[1] 6,9 N/mm²[2] 6,9 N/mm²[2] 460 %[3] 460 %[3] 15 N/mm[4] 15 N/mm[4] 7 %[6] 7 %[6]
ELASTOSIL® R 701/50 OH beige beige 51[1] 51[1] 7,8 N/mm²[2] 7,8 N/mm²[2] 470 %[3] 470 %[3] 17 N/mm[4] 17 N/mm[4] 7 %[6] 7 %[6]
ELASTOSIL® R 701/60 OH beige beige 61[1] 61[1] 7,6 N/mm²[2] 7,6 N/mm²[2] 340 %[3] 340 %[3] 17 N/mm[4] 17 N/mm[4] 6 %[6] 6 %[6]
ELASTOSIL® R 701/70 OH beige beige 71[1] 71[1] 7,8 N/mm²[2] 7,8 N/mm²[2] 280 %[3] 280 %[3] 16 N/mm[4] 16 N/mm[4] 7 %[6] 7 %[6]
ELASTOSIL® R 701/80 S beige beige 80[1] 80[1] 7,6 N/mm²[2] 7,6 N/mm²[2] 200 %[3] 200 %[3] 16 N/mm[4] 16 N/mm[4] 17 %[6] 17 %[6]
ELASTOSIL® R 752/50 OH translucent translucent 50[1] 50[1] 9,9 N/mm²[2] 9,9 N/mm²[2] 770 %[3] 770 %[3] 32 N/mm[4] 32 N/mm[4] 38 %[5] 38 %[5]
ELASTOSIL® R 752/70 OH translucent translucent 70[1] 70[1] 8,5 N/mm²[2] 8,5 N/mm²[2] 460 %[3] 460 %[3] 22 N/mm[4] 22 N/mm[4] 19 %[5] 19 %[5]
ELASTOSIL® R 756/40 OH transparent transparent 41[1] 41[1] 8,8 N/mm²[2] 8,8 N/mm²[2] 610 %[3] 610 %[3] 20 N/mm[4] 20 N/mm[4] 9 %[5] 9 %[5]
ELASTOSIL® R 756/50 OH transparent transparent 47[1] 47[1] 9,5 N/mm²[2] 9,5 N/mm²[2] 540 %[3] 540 %[3] 21 N/mm[4] 21 N/mm[4] 9 %[5] 9 %[5]
ELASTOSIL® R 756/60 OH transparent transparent 59[1] 59[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 440 %[3] 440 %[3] 23 N/mm[4] 23 N/mm[4] 9 %[5] 9 %[5]
ELASTOSIL® R 756/70 OH transparent transparent 70[1] 70[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 380 %[3] 380 %[3] 24 N/mm[4] 24 N/mm[4] 10 %[5] 10 %[5]
ELASTOSIL® R 861/60 S translucent translucent 60[1] 60[1] 8,4 N/mm²[2] 8,4 N/mm²[2] 390 %[3] 390 %[3] 18 N/mm[4] 18 N/mm[4] 6 %[5] 6 %[5]
ELASTOSIL® R 861/70 S translucent translucent 73[1] 73[1] 8,6 N/mm²[2] 8,6 N/mm²[2] 290 %[3] 290 %[3] 17 N/mm[4] 17 N/mm[4] 8 %[5] 8 %[5]
ELASTOSIL® R 862/60 OH transparent transparent 62[1] 62[1] 8,2 N/mm²[2] 8,2 N/mm²[2] 280 %[3] 280 %[3] 15 N/mm[4] 15 N/mm[4] 5 %[5] 5 %[5]
ELASTOSIL® R 865/40 S translucent translucent 40[1] 40[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 430 %[3] 430 %[3] 13 N/mm[4] 13 N/mm[4] 10 %[5] 10 %[5]
ELASTOSIL® R 865/50 S translucent translucent 48[1] 48[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 370 %[3] 370 %[3] 14 N/mm[4] 14 N/mm[4] 7 %[5] 7 %[5]
ELASTOSIL® R 865/60 S translucent translucent 60[1] 60[1] 9,3 N/mm²[2] 9,3 N/mm²[2] 380 %[3] 380 %[3] 18 N/mm[4] 18 N/mm[4] 5 %[5] 5 %[5]
ELASTOSIL® R 865/70 S translucent translucent 69[1] 69[1] 8,9 N/mm²[2] 8,9 N/mm²[2] 310 %[3] 310 %[3] 18 N/mm[4] 18 N/mm[4] 8 %[5] 8 %[5]
ELASTOSIL® R plus 4001/20 MH transparent transparent 20[1] 20[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 1300 %[3] 1300 %[3] 34 N/mm[4] 34 N/mm[4] 30 %[5] 30 %[5]
ELASTOSIL® R plus 4001/30 MH transparent transparent 30[1] 30[1] 11,5 N/mm²[2] 11,5 N/mm²[2] 1030 %[3] 1030 %[3] 45 N/mm[4] 45 N/mm[4] 37 %[5] 37 %[5]
ELASTOSIL® R plus 4001/40 MH transparent transparent 40[1] 40[1] 10,9 N/mm²[2] 10,9 N/mm²[2] 1000 %[3] 1000 %[3] 38 N/mm[4] 38 N/mm[4] 22 %[5] 22 %[5]
ELASTOSIL® R plus 4001/50 MH transparent transparent 50[1] 50[1] 11,5 N/mm²[2] 11,5 N/mm²[2] 870 %[3] 870 %[3] 39 N/mm[4] 39 N/mm[4] 20 %[5] 20 %[5]
ELASTOSIL® R plus 4001/60 MH transparent transparent 60[1] 60[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 740 %[3] 740 %[3] 30 N/mm[4] 30 N/mm[4] 20 %[5] 20 %[5]
ELASTOSIL® R plus 4001/70 MH transparent transparent 70[1] 70[1] 10,3 N/mm²[2] 10,3 N/mm²[2] 740 %[3] 740 %[3] 38 N/mm[4] 38 N/mm[4] 30 %[5] 30 %[5]
ELASTOSIL® R plus 4001/80 MH transparent transparent 80[1] 80[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 640 %[3] 640 %[3] 29 N/mm[4] 29 N/mm[4] 45 %[5] 45 %[5]
ELASTOSIL® R plus 4001/90 MH transparent transparent 88[1] 88[1] 6,2 N/mm²[2] 6,2 N/mm²[2] 225 %[3] 225 %[3] 21 N/mm[4] 21 N/mm[4] 43 %[5] 43 %[5]
ELASTOSIL® R plus 4060/50 MH transparent transparent 50[1] 50[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 500 %[3] 500 %[3] 25 N/mm[4] 25 N/mm[4] 9 %[5] 9 %[5]
ELASTOSIL® R plus 4060/60 MH transparent transparent 60[1] 60[1] 7,5 N/mm²[2] 7,5 N/mm²[2] 380 %[3] 380 %[3] 20 N/mm[4] 20 N/mm[4] 10 %[5] 10 %[5]
ELASTOSIL® R plus 4070/20 MH translucent translucent 22[1] 22[1] 7,9 N/mm²[2] 7,9 N/mm²[2] 1300 %[3] 1300 %[3] 35 N/mm[4] 35 N/mm[4] 57 %[6] 57 %[6]
ELASTOSIL® R plus 4070/30 MH translucent translucent 31[1] 31[1] 10,5 N/mm²[2] 10,5 N/mm²[2] 1200 %[3] 1200 %[3] 52 N/mm[4] 52 N/mm[4] 46 %[6] 46 %[6]
ELASTOSIL® R plus 4070/60 MH translucent translucent 62[1] 62[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 790 %[3] 790 %[3] 39 N/mm[4] 39 N/mm[4] 49 %[6] 49 %[6]
Legend
[1] Härte Shore A | DIN ISO 48-4,  [2] Reißfestigkeit | ISO 37 Type 1,  [3] Reißdehnung | ISO 37 Type 1,  [4] Weiterreißwiderstand | ASTM D 624 B,  [5] Druckverformungsrest | 22 h | 175 °C | DIN ISO 815-1 Typ B Methode A | post-cured 4 h / 200 °C,  [6] Druckverformungsrest | 22 h | 175 °C | DIN ISO 815-1 Typ B Methode A 

Bestellen

Meine Medien


Meine Favoriten

Meine Produkte