ELASTOSIL® COLOR PASTE FL ANTHRACITE GREY RAL 7016 F

 

ELASTOSIL® COLOR PASTE FL ANTHRACITE GREY RAL 7016 F is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers which are commonly used to produce ELASTOSIL® liquid silicone rubber.

This ensures a homogeneous covulcanization of the color paste without significant impairment of the physical properties (e.g. hardness) and without migration as it may be observed for systems based on silicone oil.



Eigenschaften

ELASTOSIL® COLOR PASTE FL ANTHRACITE GREY RAL 7016 F is pourable and ready-to-use after stirring up. A dilution is not required.

The colors have generally a good resis­tance to sunlight, UV and hot air. The resistance should be checked for individual cases, especially for long term applications. If the dosage recom­mendations are followed, the mechanical pro­perties of the colored vulcanizates will not be significantly impaired.

Spezifische Merkmale von ELASTOSIL® COLOR PASTE FL ANTHRACITE GREY RAL 7016 F

  • Additiv
  • BfR konform
  • FDA konform
  • medizinisch
  • niedriger Flüchtigengehalt

ELASTOSIL® COLOR PASTE FL ANTHRACITE GREY RAL 7016 F has been developed particularly for coloring addition-curing ELASTOSIL® LR liquid silicone rubber and ELASTOSIL® RT RTV-2 silicone rubber.

ELASTOSIL® COLOR PASTE FL ANTHRACITE GREY RAL 7016 F may be used for coloring silicone parts intended for sensitive applications and complying with the “Recommendation XV. Silicones" and “IX. Pigments for coloring plastics" of the BfR and FDA Regulation CFR 21 § 177.2600 "Rubber Articles Intended for Repeated Use" under observance of any given limitations on extractable and volatile substances. Please see the actual Product Compliance Sheet of this product and/or the separate Food Contact Statement for detailed information about food contact including information about any limitation in view of dosage and/or condition of use that may apply for this product. A statement regarding biocompatibility according to USP<88> class VI and selected tests of ISO 10993 is available on request.

Before using ELASTOSIL® COLOR PASTES FL, the paste must be thoroughly stirred. This is also required if there has been a long interruption in production. It may be necessary to repeat this procedure in case of very long production runs.

Depending on the color intensity desired, 0.5 to 4.0 % pigment paste should be added, the usual dosage being 2 %. Generally, the dosage should be kept at a minimum. In individual cases, an excess of color paste may slow down the curing characteristics. Customers may produce other colors by mixing pigment pastes. Suggestions for formulations can be provided on request.

Verpackung / Gebinde

This product is available in 20 kg pail and 1kg tin.

Lagerung

The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable.
In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
Deutschland
+49  711  61942-0 (Phone)
+49 711 61942-61  (Fax)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Bestellen

Meine Medien


Meine Favoriten

Meine Produkte