WACKER® WD - WINDOWS AND DOORS Colored
WACKER® WD-WINDOWS AND DOORS color is a one-part, neutral-curing, low modulus silicone sealant with good adhesion especially developed for window and door sealing application.
WACKER® WD-WINDOWS AND DOORS color cures at room temperature under the action of atmospheric moisture to give a permanently flexible silicone rubber.
• Ready gunnability at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high temperatures (+100°C)
• Good tooling characteristics
• Non-corrosive to metals
• Suitable for alkaline substrate such as concrete, mortar, fibrous cement.
• Specially for sealing of internal and external connection and expansion joints.
• Equally suitable for fenestration and glazing (e.g. frame, transoms, mullions).
The substrate areas that will be in contact with the sealant must be clean, dry and free of all loose material, dust, dirt, rust, oil and other contaminants. Non-porous substrates should be cleaned with a solvent and a clean, lint-free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface.
WACKER® WD-WINDOWS AND DOORS color exhibits excellent primerless adhesion to many substrates, e.g., glass, tiles, ceramics, enamel, glazed tiles and clinker; metals, e.g. aluminum, steel, zinc or copper; impregnated, varnished or painted wood, and many plastics.
Users must carry out their own tests due to the great variety of substances.
The adhesion can be improved in many cases by pretreatment of the substrates with a primer.
If adhesion difficulties arise, please contact our technical service.
Restrictions on use
WACKER® WD-WINDOWS AND DOORS color may be discolored in contact with some organic elastomers, e.g., EPDM, APTK and neoprene.
WACKER® WD-WINDOWS AND DOORS color is not recommended for use on natural stone, such as marble, granite, quartzite, as it can cause staining.
WACKER® WD-WINDOWS AND DOORS color is not recommended for sealing of aquaria.
WACKER® WD-WINDOWS AND DOORS color must not be used structural glazing bonding.
WACKER® WD-WINDOWS AND DOORS color is not suitable for food grade applications where the joints are likely to come in contact with food.
WACKER® WD-WINDOWS AND DOORS color is not suitable for use as a mirror adhesive.
Verpackung / Gebinde
WACKER®-WINDOWS AND DOORS color is usually supplied in standard size cartridges that fit all standard caulking guns.
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Vertrieb & Support
Es wurden leider keine Distributoren für dieses Produkt gefunden