Dieser Inhalt ist für Deutschland bestimmt. Unser System hat erkannt, dass Sie aus USA kommen. Wollen Sie USA als neues Land setzen?

ELASTOSIL® R 570/50 OH

ELASTOSIL® R 570/50 OH is a peroxide curing HCR silicone rubber for the manufacture of electrically conductive products.



Eigenschaften

This product is electrically conductive and shows a low volume resistivity.

 

ELASTOSIL® R 570/50 OH is not suitable for vulcanisation using crosslinker E.

 

This product can be used within a temperature range of - 55 °C to + 210 °C.

Spezifische Merkmale von ELASTOSIL® R 570/50 OH

  • elektrisch leitfähig

Disclaimer

Alle unsere Angaben beruhen auf bestem Wissen. Allerdings übernehmen wir hierfür keine Haftung oder Gewährleistung und behalten uns jederzeit technische Änderungen vor. Es liegt in der eigenen Verantwortung des Käufers, die Angaben sowie die Geeignetheit unseres Produktes für den vorgesehenen Einsatzzweck vor dem Gebrauch zu überprüfen. Vertragliche Regelungen gehen immer vor. Der Gewährleistungs- und Haftungsausschluss gilt - insbesondere im Ausland - auch im Hinblick auf Schutzrechte Dritter.

Control elements for cable accessories, contacts and keypads, interconnectors, electrically conductive rollers, electrodes.

The raw rubber requires the addition of peroxides for vulcanization at elevated temperatures. A homogeneous  incorporation is a must, but please avoid temperatures >30°C along the incorporation process in order to maintain best processing behavior. Pot life is depending on the used peroxide and storage condition.

 

IMPORTANT: In order to produce a ready-to-use-compound, an increased concentration of peroxide is needed.

ELASTOSIL® R 570/50 OH can be crosslinked with 1.7% crosslinker C1 or with 1.5% crosslinker C6. Crosslinker E is not suitable!

Processing by press moulding or extrusion and curing by cure vapor (CV). Post curing for 4h at 200°C is necessary.

 

For detailed information please refer to the latest edition of our brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".

Verpackung / Gebinde

This product is available in 20 kg and 540 kg cardboard packaging.

Special delivery forms are possible but depend on several technical and commercial aspects. Please contact your local sales manager in such cases.

Lagerung

Please store the cardboard boxes in a dry and cool place. Already opened boxes should be closed again to avoid any contamination. The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
Deutschland
+49  711  61942-0 (Phone)
+49 711 61942-61  (Fax)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Sie möchten ein Produktmuster?

Hier können Sie ein Produktmuster anfordern.

Muster anfordern

Mehr Produkte

Produkte Technische Daten
Aussehen Dichte Druckverformungsrest Härte Shore A Reißdehnung Reißfestigkeit spezifischer Durchgangswiderstand
ELASTOSIL® R 101/25 OH transluzent transluzent 1,07 g/cm³[1] 8,93 lb/gal[1] 13 %[7] 13 %[7] 23[3] 23[3] 900 %[6] 900 %[6] 7,0 N/mm²[5] 7,0 N/mm²[5] - -
ELASTOSIL® R 101/35 OH transluzent transluzent 1,09 g/cm³[1] 9,096 lb/gal[1] 10 %[7] 10 %[7] 35[3] 35[3] 700 %[6] 700 %[6] 8,0 N/mm²[5] 8,0 N/mm²[5] - -
ELASTOSIL® R 101/45 OH transluzent transluzent 1,10 g/cm³[1] 9,18 lb/gal[1] 10 %[7] 10 %[7] 47[3] 47[3] 540 %[6] 540 %[6] 8,0 N/mm²[5] 8,0 N/mm²[5] - -
ELASTOSIL® R 101/65 OH transluzent transluzent 1,13 g/cm³[1] 9,43 lb/gal[1] 10 %[7] 10 %[7] 65[3] 65[3] 200 %[6] 200 %[6] 8,0 N/mm²[5] 8,0 N/mm²[5] - -
ELASTOSIL® R 401/10 OH transparent transparent 1,07 g/cm³[1] 8,93 lb/gal[1] 41 %[7] 41 %[7] 13[3] 13[3] 1200 %[6] 1200 %[6] 6,00 N/mm²[5] 6,00 N/mm²[5] - -
ELASTOSIL® R 401/20 OH transparent transparent 1,11 g/cm³[1] 9,263 lb/gal[1] 33 %[7] 33 %[7] 23[3] 23[3] 1000 %[6] 1000 %[6] 9,0 N/mm²[5] 9,0 N/mm²[5] - -
ELASTOSIL® R 401/30 OH transparent transparent 1,11 g/cm³[1] 9,263 lb/gal[1] 20 %[7] 20 %[7] 34[3] 34[3] 720 %[6] 720 %[6] 10,0 N/mm²[5] 10,0 N/mm²[5] - -
ELASTOSIL® R 401/30 S transparent transparent 1,09 g/cm³[1] 9,096 lb/gal[1] 15 %[7] 15 %[7] 33[3] 33[3] 800 %[6] 800 %[6] 10 N/mm²[5] 10 N/mm²[5] - -
ELASTOSIL® R 401/40 S transpaent transpaent 1,12 g/cm³[1] 9,347 lb/gal[1] 16 %[7] 16 %[7] 41[3] 41[3] 730 %[6] 730 %[6] 11,0 N/mm²[5] 11,0 N/mm²[5] - -
ELASTOSIL® R 401/50 S transparent transparent 1,15 g/cm³[1] 9,597 lb/gal[1] 17 %[7] 17 %[7] 52[3] 52[3] 640 %[6] 640 %[6] 12,0 N/mm²[5] 12,0 N/mm²[5] - -
ELASTOSIL® R 401/55 S transparent transparent 1,14 g/cm³[1] 9,514 lb/gal[1] 35 %[7] 35 %[7] 55[4] - 470 %[6] 470 %[6] 11,0 N/mm²[5] 11,0 N/mm²[5] - -
ELASTOSIL® R 401/60 S transparent transparent 1,15 g/cm³[1] 9,597 lb/gal[1] 16 %[7] 16 %[7] 62[3] 62[3] 530 %[6] 530 %[6] 11,0 N/mm²[5] 11,0 N/mm²[5] - -
ELASTOSIL® R 401/70 S transparent transparent 1,18 g/cm³[1] 9,848 lb/gal[1] 22 %[7] 22 %[7] 71[3] 71[3] 530 %[6] 530 %[6] 11,0 N/mm²[5] 11,0 N/mm²[5] - -
ELASTOSIL® R 401/80 S transparent transparent 1,20 g/cm³[1] 10,014 lb/gal[1] 41 %[7] 41 %[7] 81[3] 81[3] 430 %[6] 430 %[6] 10,0 N/mm²[5] 10,0 N/mm²[5] - -
ELASTOSIL® R 401/90 OH transparent transparent 1,22 g/cm³[1] 10,181 lb/gal[1] 19 %[7] 19 %[7] 89[3] 89[3] 160 %[6] 160 %[6] 7,4 N/mm²[5] 7,4 N/mm²[5] - -
ELASTOSIL® R 420/30 OH transparent transparent 1,10 g/cm³[1] 9,18 lb/gal[1] 18 %[7] 18 %[7] 29[3] 29[3] 930 %[6] 930 %[6] 10,0 N/mm²[5] 10,0 N/mm²[5] - -
ELASTOSIL® R 420/40 S transparent transparent 1,12 g/cm³[1] 9,347 lb/gal[1] 24 %[7] 24 %[7] 43[3] 43[3] 800 %[6] 800 %[6] 10,0 N/mm²[5] 10,0 N/mm²[5] - -
ELASTOSIL® R 420/50 S transparent transparent 1,15 g/cm³[1] 9,597 lb/gal[1] 23 %[7] 23 %[7] 53[3] 53[3] 730 %[6] 730 %[6] 11,0 N/mm²[5] 11,0 N/mm²[5] - -
ELASTOSIL® R 420/60 S transparent transparent 1,17 g/cm³[1] 9,764 lb/gal[1] 25 %[7] 25 %[7] 62[3] 62[3] 660 %[6] 660 %[6] 11,0 N/mm²[5] 11,0 N/mm²[5] - -
ELASTOSIL® R 420/70 S transparent transparent 1,19 g/cm³[1] 9,931 lb/gal[1] 38 %[7] 38 %[7] 72[3] 72[3] 570 %[6] 570 %[6] 10,0 N/mm²[5] 10,0 N/mm²[5] - -
ELASTOSIL® R 490/55 OH transparent transparent 1,17 g/cm³[1] 9,764 lb/gal[1] 28 %[7] 28 %[7] 53[3] 53[3] 520 %[6] 520 %[6] 11,0 N/mm²[5] 11,0 N/mm²[5] - -
ELASTOSIL® R 570/50 OH Schwarz Schwarz 1,11 g/cm³[1] 9,263 lb/gal[1] 37 %[7] 37 %[7] 52[3] 52[3] 370 %[6] 370 %[6] 7,9 N/mm²[5] 7,9 N/mm²[5] OHCstring, Ohmcm[11] OHCstring, Ohmcm[11]
ELASTOSIL® R 570/60 OH Schwarz Schwarz 1,13 g/cm³[1] 9,43 lb/gal[1] 29 %[7] 29 %[7] 62[3] 62[3] 230 %[6] 230 %[6] 7,4 N/mm²[5] 7,4 N/mm²[5] 3,4 Ohmcm[11] 3,4 Ohmcm[11]
ELASTOSIL® R 570/70 OH Schwarz Schwarz 1,16 g/cm³[1] 9,681 lb/gal[1] 29 %[7] 29 %[7] 71[3] 71[3] 180 %[6] 180 %[6] 7,4 N/mm²[5] 7,4 N/mm²[5] 4,1 Ohmcm[11] 4,1 Ohmcm[11]
ELASTOSIL® R 573/50 A/B black black 1,11 g/cm³[1] 9,263 lb/gal[1] 30 %[8] - 50[3] 50[3] 340 %[6] 340 %[6] 5,5 N/mm²[5] 5,5 N/mm²[5] 7 Ohmcm[12] -
ELASTOSIL® R 573/70 A/B black black 1,16 g/cm³[1] 9,681 lb/gal[1] 29 %[8] - 71[3] 71[3] 246 %[6] 246 %[6] 6,2 N/mm²[5] 6,2 N/mm²[5] 1.6 Ohmcm[12] -
ELASTOSIL® R 700/40 OH transluzent[10] - 1,09 g/cm³[2] - 10 %[9] - 42[3] 42[3] 470 %[6] 470 %[6] 7,3 N/mm²[5] 7,3 N/mm²[5] - -
ELASTOSIL® R 700/80 OH beige[10] - 1,39 g/cm³[2] - 17 %[9] - 83[3] 83[3] 190 %[6] 190 %[6] 6,2 N/mm²[5] 6,2 N/mm²[5] - -
ELASTOSIL® R 701/40 S opaque opaque 1,10 g/cm³[2] - 7 %[9] - 40[3] 40[3] 460 %[6] 460 %[6] 6,9 N/mm²[5] 6,9 N/mm²[5] - -
ELASTOSIL® R 701/50 OH Beige Beige 1,15 g/cm³[2] - 7 %[9] - 51[3] 51[3] 470 %[6] 470 %[6] 7,8 N/mm²[5] 7,8 N/mm²[5] - -
ELASTOSIL® R 701/60 OH Beige Beige 1,24 g/cm³[2] - 6 %[9] - 61[3] 61[3] 340 %[6] 340 %[6] 7,6 N/mm²[5] 7,6 N/mm²[5] - -
ELASTOSIL® R 701/70 OH Beige Beige 1,30 g/cm³[2] - 7 %[9] - 71[3] 71[3] 280 %[6] 280 %[6] 7,8 N/mm²[5] 7,8 N/mm²[5] - -
ELASTOSIL® R 701/80 S beige beige 1,39 g/cm³[2] - 17 %[9] - 80[3] 80[3] 200 %[6] 200 %[6] 7,6 N/mm²[5] 7,6 N/mm²[5] - -
ELASTOSIL® R 750/40 OH transluzent transluzent 1,12 g/cm³[1] 9,347 lb/gal[1] 26 %[7] 26 %[7] 38[3] 38[3] 630 %[6] 630 %[6] 10,5 N/mm²[5] 10,5 N/mm²[5] - -
ELASTOSIL® R 750/50 OH transluzent transluzent 1,14[1] 9,514[1] 20 %[7] 20 %[7] 48[3] 48[3] 530 %[6] 530 %[6] 10,5 N/mm²[5] 10,5 N/mm²[5] - -
ELASTOSIL® R 750/60 OH transluzent transluzent 1,18 g/cm³[1] 9,848 lb/gal[1] 14 %[7] 14 %[7] 56[3] 56[3] 460 %[6] 460 %[6] 8,1 N/mm²[5] 8,1 N/mm²[5] - -
ELASTOSIL® R 752/50 OH translucent translucent 1,18 g/cm³[1] 9,848 lb/gal[1] 38 %[7] 38 %[7] 50[3] 50[3] 770 %[6] 770 %[6] 9,9 N/mm²[5] 9,9 N/mm²[5] - -
ELASTOSIL® R 752/70 OH translucent translucent 1,22 g/cm³[1] 10,181 lb/gal[1] 19 %[7] 19 %[7] 70[3] 70[3] 460 %[6] 460 %[6] 8,5 N/mm²[5] 8,5 N/mm²[5] - -
ELASTOSIL® R 755/40 OH Weiß Weiß 1,11 g/cm³[2] - - - 44[3] 44[3] 340 %[6] 340 %[6] 4,2 N/mm²[5] 4,2 N/mm²[5] - -
ELASTOSIL® R 755/60 OH opak opak 1,18 g/cm³[1] 9,848 lb/gal[1] 16 %[7] 16 %[7] 61[3] 61[3] 300 %[6] 300 %[6] 7,8 N/mm²[5] 7,8 N/mm²[5] - -
ELASTOSIL® R 756/40 OH transparent transparent 1,11 g/cm³[1] 9,263 lb/gal[1] 9 %[7] 9 %[7] 41[3] 41[3] 610 %[6] 610 %[6] 8,8 N/mm²[5] 8,8 N/mm²[5] - -
ELASTOSIL® R 756/50 OH transparent transparent 1,11 g/cm³[1] 9,263 lb/gal[1] 9 %[7] 9 %[7] 47[3] 47[3] 540 %[6] 540 %[6] 9,5 N/mm²[5] 9,5 N/mm²[5] - -
ELASTOSIL® R 756/60 OH transparent transparent 1,15 g/cm³[1] 9,597 lb/gal[1] 9 %[7] 9 %[7] 59[3] 59[3] 440 %[6] 440 %[6] 10,0 N/mm²[5] 10,0 N/mm²[5] - -
ELASTOSIL® R 756/70 OH transparent transparent 1,18 g/cm³[1] 9,848 lb/gal[1] 10 %[7] 10 %[7] 70[3] 70[3] 380 %[6] 380 %[6] 10,0 N/mm²[5] 10,0 N/mm²[5] - -
ELASTOSIL® R 771/60 OH - - 1,44 g/cm³[1] 12,017 lb/gal[1] - - 60[3] 60[3] 410 %[6] 410 %[6] 3,4 N/mm²[5] 3,4 N/mm²[5] - -
ELASTOSIL® R 771/70 OH - - 1,48 g/cm³[1] 12,351 lb/gal[1] - - 70[3] 70[3] 270 %[6] 270 %[6] 4,0 N/mm²[5] 4,0 N/mm²[5] - -
ELASTOSIL® R 861/60 S transluzent transluzent ca. 1,16 g/cm³[1] ca. 9,681 lb/gal[1] 6 %[7] 6 %[7] 60[3] 60[3] 390 %[6] 390 %[6] 8,4 N/mm²[5] 8,4 N/mm²[5] - -
ELASTOSIL® R 861/70 S transluzent transluzent 1,16 g/cm³[1] 9,681 lb/gal[1] 8 %[7] 8 %[7] 73[3] 73[3] 290 %[6] 290 %[6] 8,6 N/mm²[5] 8,6 N/mm²[5] - -
ELASTOSIL® R 863/65 MH - - 1,18 g/cm³[1] 9,848 lb/gal[1] 10 %[7] 10 %[7] 65[3] 65[3] 440 %[6] 440 %[6] 10,0 N/mm²[5] 10,0 N/mm²[5] - -
ELASTOSIL® R 865/40 S transluzent transluzent 1,11[2] - 10 %[7] 10 %[7] 40[3] 40[3] 430 %[6] 430 %[6] 8,0 N/mm²[5] 8,0 N/mm²[5] - -
ELASTOSIL® R 865/50 S transluzent transluzent 1,12 g/cm³[2] - 7 %[7] 7 %[7] 48[3] 48[3] 370 %[6] 370 %[6] 8,0 N/mm²[5] 8,0 N/mm²[5] - -
ELASTOSIL® R 865/60 S transluzent transluzent 1,16 g/cm³[2] - 5 %[7] 5 %[7] 60[3] 60[3] 380 %[6] 380 %[6] 9,3 N/mm²[5] 9,3 N/mm²[5] - -
ELASTOSIL® R 865/70 S transluzent transluzent 1,18[2] - 8 %[7] 8 %[7] 69[3] 69[3] 310 %[6] 310 %[6] 8,9 N/mm²[5] 8,9 N/mm²[5] - -
ELASTOSIL® R plus 4000/40 MH transparent transparent 1,12 g/cm³[1] 9,347 lb/gal[1] 35 %[7] 35 %[7] 40[3] 40[3] 860 %[6] 860 %[6] 9,3 N/mm²[5] 9,3 N/mm²[5] - -
ELASTOSIL® R plus 4000/50 transparent transparent 1,13 g/cm³[1] 9,43 lb/gal[1] 43 %[7] 43 %[7] 50[3] 50[3] 850 %[6] 850 %[6] 9,1 N/mm²[5] 9,1 N/mm²[5] - -
ELASTOSIL® R plus 4000/60 transparent transparent 1,16 g/cm³[1] 9,681 lb/gal[1] 23 %[7] 23 %[7] 60[3] 60[3] 680 %[6] 680 %[6] 9,9 N/mm²[5] 9,9 N/mm²[5] - -
ELASTOSIL® R plus 4000/70 transparent transparent 1,16 g/cm³[1] 9,681 lb/gal[1] 19 %[7] 19 %[7] 70[3] 70[3] 590 %[6] 590 %[6] 9,3 N/mm²[5] 9,3 N/mm²[5] - -
ELASTOSIL® R plus 4001/20 MH transparent transparent 1,10 g/cm³[1] 9,18 lb/gal[1] 30 %[7] 30 %[7] 20[3] 20[3] 1300 %[6] 1300 %[6] 8,0 N/mm²[5] 8,0 N/mm²[5] - -
ELASTOSIL® R plus 4001/30 MH transparent transparent 1,10 g/cm³[1] 9,18 lb/gal[1] 37 %[7] 37 %[7] 30[3] 30[3] 1030 %[6] 1030 %[6] 11,5 N/mm²[5] 11,5 N/mm²[5] - -
ELASTOSIL® R plus 4001/40 MH transparent transparent 1,11 g/cm³[1] 9,263 lb/gal[1] 22 %[7] 22 %[7] 40[3] 40[3] 1000 %[6] 1000 %[6] 10,9 N/mm²[5] 10,9 N/mm²[5] - -
ELASTOSIL® R plus 4001/50 MH transparent transparent 1,13 g/cm³[1] 9,43 lb/gal[1] 20 %[7] 20 %[7] 50[3] 50[3] 870 %[6] 870 %[6] 11,5 N/mm²[5] 11,5 N/mm²[5] - -
ELASTOSIL® R plus 4001/60 MH transparent transparent 1,14 g/cm³[1] 9,514 lb/gal[1] 20 %[7] 20 %[7] 60[3] 60[3] 740 %[6] 740 %[6] 11,0 N/mm²[5] 11,0 N/mm²[5] - -
ELASTOSIL® R plus 4001/70 MH transparent transparent 1,17 g/cm³[1] 9,764 lb/gal[1] 30 %[7] 30 %[7] 70[3] 70[3] 740 %[6] 740 %[6] 10,3 N/mm²[5] 10,3 N/mm²[5] - -
ELASTOSIL® R plus 4001/80 MH transparent transparent 1,20 g/cm³[1] 10,014 lb/gal[1] 45 %[7] 45 %[7] 80[3] 80[3] 640 %[6] 640 %[6] 8,0 N/mm²[5] 8,0 N/mm²[5] - -
ELASTOSIL® R plus 4001/90 MH transparent transparent 1,21 g/cm³[1] 10,098 lb/gal[1] 43 %[7] 43 %[7] 88[3] 88[3] 225 %[6] 225 %[6] 6,2 N/mm²[5] 6,2 N/mm²[5] - -
ELASTOSIL® R plus 4020/40 MH transparent transparent 1,14 g/cm³[1] 9,514 lb/gal[1] 29 %[7] 29 %[7] 39[3] 39[3] 1000 %[6] 1000 %[6] 10,9 N/mm²[5] 10,9 N/mm²[5] - -
ELASTOSIL® R plus 4020/50 MH transparent transparent 1,16 g/cm³[1] 9,681 lb/gal[1] 26 %[7] 26 %[7] 49[3] 49[3] 830 %[6] 830 %[6] 11,0 N/mm²[5] 11,0 N/mm²[5] - -
ELASTOSIL® R plus 4020/60 MH transparent transparent 1,18 g/cm³[1] 9,848 lb/gal[1] 18 %[7] 18 %[7] 59[3] 59[3] 850 %[6] 850 %[6] 11,9 N/mm²[5] 11,9 N/mm²[5] - -
ELASTOSIL® R plus 4020/70 MH transparent transparent 1,20 g/cm³[1] 10,014 lb/gal[1] 22 %[7] 22 %[7] 71[3] 71[3] 660 %[6] 660 %[6] 10,4 N/mm²[5] 10,4 N/mm²[5] - -
ELASTOSIL® R plus 4050/55 transparent transparent 1,13 g/cm³[1] 9,43 lb/gal[1] 6 %[7] 6 %[7] 58[3] 58[3] 400 %[6] 400 %[6] 8,4 N/mm²[5] 8,4 N/mm²[5] - -
ELASTOSIL® R plus 4050/55 MH 9005 black black 1,13 g/cm³[1] 9,43 lb/gal[1] 6 %[7] 6 %[7] 58[3] 58[3] 400 %[6] 400 %[6] 8,4 N/mm²[5] 8,4 N/mm²[5] - -
ELASTOSIL® R plus 4060/50 MH transparent transparent 1,15 g/cm³[1] 9,597 lb/gal[1] 9 %[7] 9 %[7] 50[3] 50[3] 500 %[6] 500 %[6] 8,0 N/mm²[5] 8,0 N/mm²[5] - -
ELASTOSIL® R plus 4060/60 MH transparent transparent 1,15 g/cm³[1] 9,597 lb/gal[1] 10 %[7] 10 %[7] 60[3] 60[3] 380 %[6] 380 %[6] 7,5 N/mm²[5] 7,5 N/mm²[5] - -
ELASTOSIL® R plus 4066/60 MH transparent transparent 1,15 g/cm³[1] 9,597 lb/gal[1] 27 %[7] 27 %[7] 60[3] 60[3] 660 %[6] 660 %[6] 8,0 N/mm²[5] 8,0 N/mm²[5] - -
ELASTOSIL® R plus 4070/20 MH - - 1,07 g/cm³[1] 8,93 lb/gal[1] 57 %[9] - 22[3] 22[3] 1300 %[6] 1300 %[6] 7,9 N/mm²[5] 7,9 N/mm²[5] - -
ELASTOSIL® R plus 4070/30 MH - - 1,11 g/cm³[1] 9,263 lb/gal[1] 46 %[9] - 31[3] 31[3] 1200 %[6] 1200 %[6] 10,5 N/mm²[5] 10,5 N/mm²[5] - -
ELASTOSIL® R plus 4070/60 MH transluzent transluzent 1,17 g/cm³[1] 9,764 lb/gal[1] 49 %[9] - 62[3] 62[3] 790 %[6] 790 %[6] 10,0 N/mm²[5] 10,0 N/mm²[5] - -
Legend
[1] Dichte | DIN EN ISO 1183-1 A,  [2] Dichte | 23 °C | DIN EN ISO 1183-1 A,  [3] Härte Shore A | ISO 7619-1,  [4] Härte Shore A | DIN ISO 7619-1,  [5] Reißfestigkeit | ISO 37 Type 1,  [6] Reißdehnung | ISO 37 Type 1,  [7] Druckverformungsrest | 22 h | 175 °C | DIN ISO 815-1 Typ B Methode A | post-cured 4 h / 200 °C,  [8] Druckverformungsrest | 22 h | 175 °C | DIN ISO 815-1 Typ B Methode A | post-cured 0.5 h / 200 °C,  [9] Druckverformungsrest | 22 h | 175 °C | DIN ISO 815-1 Typ B Methode A,  [10] Aussehen and color,  [11] spezifischer Durchgangswiderstand | 23 °C | DIN IEC 93,  [12] spezifischer Durchgangswiderstand | IEC 62631-3-1 

Bestellen

Meine Medien


Meine Favoriten

Meine Produkte