ELASTOSIL® M 4130 US A/B
Pourable, addition-curing, 1:1 two-component silicone rubber that vulcanizes at room temperature.
ELASTOSIL® M 4130 US A/B
Eigenschaften
- Very good flow
- Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
- Medium hardness (Shore A approx. 30)
- High tear strength with unique knotty tear characteristics
- Excellent long-term stability of the mechanical properties of the vulcanizate
- Great resistance to common casting resins
Datenblätter
Important
The platinum catalyst is contained in component A.
Caution!
Only components A and B with the same lot number may be processed together!
To ensure optimum flow of the material, the components must be stirred thoroughly before they are removed or processed in their containers.
The tables below indicate the pot lives and curing times at various temperatures.
The pot life figures indicate the time required for the mix to reach a viscosity of 60 000 mPa s.
The curing times apply to a layer thickness of 0.40”.
Comprehensive instructions are given in our "ELASTOSIL® MOLDMAKING FACTBOOK”.
Lagerung
The "Best use before end date" of each batch is shown on the Certificate of Analysis. Storage beyond the date specified on the Certificate of Analysis does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Vertrieb & Support
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.