ELASTOSIL® A16 BLUE

ELASTOSIL® A16 BLUE is a solventless, one component, curable elastomer designed for electronic applications. Under normal conditions ELASTOSIL® A16 BLUE has a very long skin-over time. Once ELASTOSIL® A16 BLUE is in place on the substrate, the cure is induced by exposure to a combination of carbon dioxide and moisture.


Eigenschaften

  • Carbon dioxide cure acceleration
  • Can be silk screened
  • Excellent adhesion



After ELASTOSIL® A16 BLUE has been applied to the substrates, the cure may be accelerated and the adhesion enhanced by the application first of heat and then of moist CO2. Adhesion of a 5 mil coating to most substrates can be enhanced by treating for four (4) minutes at 120°F followed by four (4) minutes in a moist CO2 environment (40-50% humidity and 1-3% CO2). On particularly difficult substrates, longer oven cycles at temperatures up to 140°F may be required to develop adhesion.

Lagerung

The "Best use before end date" of each batch is shown on the Certificate of Analysis. Storage beyond the date specified on the Certificate of Analysis does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
Deutschland
+49  711  61942-0 (Phone)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Bestellen

Meine Medien


Zum Bestellformular

Vertriebskontakt


Meine Favoriten

Meine Produkte