ELASTOSIL® A07 TRANSLUCENT

Feuchtigkeitsvernetzender Siliconkautschuk (RTV-1) ELASTOSIL®
ELASTOSIL® A07 TRANSLUCENT is a free flowable, solvent-based RTV-1 silicone dispersion. It cures at room temperature or elevated temperature by reaction with air humidity to a flexible silicone coating. During cure it splits off an organic amine.
Download Vertriebskontakt

Eigenschaften

  • ready-to-use, one-component system
  • low module
  • excellent primerless adhesion to many substrates
  • no use of organotin catalysts

Spezifische Merkmale von ELASTOSIL® A07 TRANSLUCENT

  • flexibel sowohl bei niedrigen (-40 °C) als auch bei hohen (+180 °C) Temperaturen
  • Fließfähig
  • lösemittelhaltig
  • niedrige Viskosität
Datenblätter
TDS Technisches Datenblatt
PDF 48,4 KB
Englisch

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ELASTOSIL® A07 TRANSLUCENT is a free flowable, solvent-based RTV-1 silicone dispersion. It cures at room temperature reaction with air humidity to a flexible silicone coating. During cure it splits off an organic amine.

It can be applied by dipping, spraying, brushing or coating. Thinner coatings can be obtained by addition of solvents (e.g. toluene, white spirit), thicker coatings can be realised by multiple step coating.

The product contains about 25% of solvent (b.w.) therefore suitable equipment has to be used and precaution measures due to the solvent vapours have to be taken.

ELASTOSIL® A07 TRANSLUCENT is a one-part room temperature curing coating therefore the curing rate depend atmospheric humidity. The curing rate can be accelerate on exposure to carbon dioxide concentration above 1% p.b.v.


Uncured or partially cured silicone can be removed by help of organic solvents such as alipatic or aromatic hydrocarboncleaning should take place before the rubber is fully cured. Once completely cured, only mechanical removal supported by prior solvent swell is possible.

 

Detailed processing instructions are given in our brochure “ROOM TEMPERATURE VULCANIZING (RTV) SILICONES - MATERIAL AND PROCESSING GUIDELINES

Lagerung

The 'Best use before end' date of each batch is shown on the product label.

 

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker-Chemie, s.r.o.

Podnikatelska 1186/45

301 00 Plzen - Skvrnany

Tschechische Republik

+420  378  010-103

(Fax) +420 378 010-113 


Distributoren

Es wurden leider keine Distributoren für dieses Produkt gefunden