paste-like, easily-pigmentable two-component compounds with short curing times and low coeffiction of friction. In comparison with ELASTOSIL
mechanical and electrical properties.
|The figures are intended as a guide and should not be used in preparing specifications.|
|Elongation at break||DIN 53504 S 1||620 %|
|Hardness Shore A||DIN 53505||31|
|Tensile strength||DIN 53504 S 1||7.6 N/mm²|
|Viscosity at (shear rate 0.9 s
||DIN 53019||750000 mPa s|
|Viscosity at (shear rate 10 s
||DIN 53019||320000 mPa s|
|Density||DIN EN ISO 1183-1 A||1.1 g/cm³|
|tear-strength||ASTM D 624 B||32 N/mm|
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product’s fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence.
This disclaimer of warranty and liability also applies – particularly in foreign countries – with respect to third parties’ rights.