Wacker Chemie AG



ELASTOSIL® P 7676 A/B is a pourable, addition-curing, two-component silicone
rubber that vulcanizes to a transparent elastomer with very low hardness.
Typical general characteristics
Property Inspection Method Value
The figures are intended as a guide and should not be used in preparing specifications.
Elongation at break ISO 37 500 %
Hardness Shore A ISO 868 < 0
Mix ratio A : B 1 : 1
Pot life at 23 °C 100 min
Tensile strength ISO 37 0.6 N/mm²
Viscosity ISO 3219 1500 mPa s
Viscosity ISO 3219 1500 mPa s
Density at 23 °C ISO 2811 1.01 g/cm³
Density at 23 °C ISO 2811 1.03 g/cm³
tear-strength ASTM D 624 B 1 N/mm

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product’s fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence.

This disclaimer of warranty and liability also applies – particularly in foreign countries – with respect to third parties’ rights.


Please select your location so that we can provide you with optimal product recommendations.


Your Sales Contact

Please select the desired location above so that we can provide the relevant contact information.