ELASTOSIL® 8000 N

ELASTOSIL® 8000 N is a one-part, neutral-curing, low modulus silicone sealant with excellent adhesion and long shelf life for perimeter sealing and glazing applications.

ELASTOSIL® 8000 N cures at room temperature in the presence of atmospheric moisture to give a permanently flexible silicone rubber.



Properties

  •  long shelf life
  •  primerless adhesion to most materials
  •  non-corrosive to metals
  •  suitable for alkaline substrates such as concrete, mortar, fibrous cement
  •  almost odorless
  • compatible with water-based and solvent-based coatings: no plasticizer migration
  •  non-sag
  •  ready gunnability at low (+5 °C) and high (+40 °C) temperatures
  •  rapid crosslinking: quickly becomes tack-free
  •  flexible at low (-40 °C) and high temperatures (+150 °C)
  •  excellent weatherability
  •  excellent processing characteristics for professional use

Specific features of ELASTOSIL® 8000 N

  • Alkoxy-cure

Fields of application

  •  sealing of connecting and expansion joints for the building industry
  •  glass and windows construction
  •  sealing of joints between glazing and supporting structure (frames, transoms, mullions)

Processing

The substrate areas that will be in contact with the sealant must be clean, dry and free of all loose material such as dust, dirt, rust, oil and other contaminants. Non-porous substrates should be cleaned with a solvent and a clean, lint-free, cotton cloth. Remove residual solvent before it evaporates paints with a fresh clean, dry cloth.

It is the responsibility of the user to test the compatibility of the sealant with the adjoining materials. Incompatible substances like coating materials (paints, varnishes and glazes) or organic plasticizer containing rubbers (EPDM, butyl and neoprene) can lead to discoloration or other impairments like loss of adhesion of the sealant. Materials in direct contact with the applied sealant like cleaning agents and materials in indirect contact like gaseous emissions can damage the sealant in its function or change its appearance. Even a longer period of time in the darkness white joints may show a slight yellowing.

Because of the multitude of these materials, Wacker cannot make a general statement to the compatibility of materials with the sealant. In case of doubt the user shall conduct appropriate preliminary tests.

The time until complete curing may be extended at lower temperature, lower humidity, increasing film thickness or by low volume of air exchange.

 

Certification

ELASTOSIL® 8000 N is certified and classified according to

  • ISO 11600 F/G, class 25 LM
  • EN 15651-1, class 25LM F-EXT-INT-CC
  • EN 15651-2, class 25LM G-CC
  • DIN 18545-2, class E
  • ASTM C920, type S, grade NS, class 35
  • SNJF F / V, class 25E
  • EMICODE EC1 PLUS
  • M1-Emission class

 

Adhesion

ELASTOSIL® 8000 N exhibits excellent primerless adhesion to many substrates, e.g. glass, tiles, ceramics, enamel, glazed tiles and clinker, metals e.g. aluminium, steel, zinc or copper, varnished, coated or painted wood, and many plastics.

Users must carry out their own tests due to the great variety of substrates. The adhesion can be improved in many cases by pretreatment of the substrates with a primer. If adhesion difficulties arise please contact our technical service.

 

Restrictions on use

ELASTOSIL® 8000 N must not be used for insulating glass applications

ELASTOSIL® 8000 N must not be used for structural glazing bonding.

ELASTOSIL® 8000 N is not recommended for use on natural stones, such as marble, granite, quartzite, as it can cause staining.

ELASTOSIL® 8000 N is not recommended for the construction of aquaria.

ELASTOSIL® 8000 N is not suitable for food grade applications where the joints are likely to come in contact with food.

ELASTOSIL® 8000 N is not recommended for application in permanently wet areas where the joint is strongly or permanently exposed to water, e.g. in swimming pools or public sanitary facilities, please contact our technical service.

 ELASTOSIL® 8000 N is not suitable for mirror mounting.

Packaging

ELASTOSIL® 8000 N is usually supplied in standard size cartridges that fit all standard caulking guns. Other types of packaging, e.g. for industrial applications, can be supplied on request. The product can also be applied by air-operated guns and almost all industrial dispensing equipment.

Storage

The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Order

My media


My favorites

My products