GENIOSIL® XT 50 and GENIOSIL® XT 55 further complement WACKER’s portfolio of silane-curing binders. Both grades are based on silane-modified polyethers with a high density of crosslinkable silyl groups which cure to a tight-mesh network that is very strong but elastic. Adhesive layers and sealing membranes formulated with GENIOSIL® XT possess high strength. However, they are also highly ductile and will tear only when subjected to strong forces. Damaged material exhibits no tendency to tear propagation.
GENIOSIL® XT thus represents the first technically equivalent alternative to conventional polyurethane-based systems. By virtue of their properties, the new polymers are ideal for applications that repeatedly subject them to dynamic forces, such as vibrations in vehicles and washing machines. Up to now, applications of this kind were essentially the domain of isocyanate-curing polymer systems.
Furthermore, GENIOSIL® XT’s low viscosity makes it easy to process at low temperatures. The binders can be formulated with and without plasticizers or fillers, and blends can be produced in any color. The compounds can be formulated for adhesion to many conventional substrates, such as metals, glass, cement, glazed tiles, wood, polycarbonate, and polymethyl methacrylate. Priming is unnecessary. As the polymers are also miscible with all other GENIOSIL® silane-terminated polyethers, compounders can vary the properties over a wide range of formulations. Typical end products are industrial adhesives, liquid waterproofing systems, and coatings.
GENIOSIL® XT 50 for Liquid Waterproofing Systems
GENIOSIL® XT 50 is an alpha-silane-terminated polymer and lends itself to the production of tin-free adhesives and crack-bridging liquid waterproofing systems. These can possess tensile strengths of up to 9 N/mm2 and tear strengths of up to 50 N/mm (measured in accordance with ASTM D 624 B-91). What is more, GENIOSIL® XT 50 can be formulated without fillers to make transparent, tin-free end products that have good mechanical properties.
GENIOSIL® XT 55 is a gamma-silane-terminated polyether. It can yield shear strengths of over 5 N/mm2 combined with elongation at break of around 700 percent, the exact values depending on the formulation. Such formulations are also notable for their high tear strength and high elastic recovery. The polymer is therefore ideal for the production of high strength, yet extremely flexible industrial adhesives of the kind used, for example, in direct glazing of windshields in the automotive industry.