SILRES® POWDER D
SILRES® POWDER D is a water-redispersible silicone water-repellent in powder form and used as a highly efficient additive.
SILRES® POWDER D acts as outstanding water repellent even at very low concentrations without affecting the water vapour permeability.
SILRES® POWDER D contains a fine mineral filler as antiblocking agent.
特性
- redispersible technology i.e. excellent mixability with water
- based on highly efficient silicones
- produced without the use of organic solvents
SILRES® POWDER D is a high-quality specialty product for enhancing the water repellency and water resistance of non load-bearing precast concrete products or mineral construction material mixes, e.g. premixed plasters, joint mortars and powder paints.
Properly formulated products exhibit:
- low water absorption coefficients
- excellent droplet effect
- low soiling tendency
- durability
SILRES® POWDER D can be used in both dry powder and liquid systems.
To produce non load-bearing precast concrete products or mineral construction material mixes such as premixed plasters, joint mortars or powder paints mix SILRES® POWDER D with the other dry materials using suitable equipment.
Very good water repellency and durability can be achieved with 0.1-0.5% based on the dry weight.
After sufficient water has been added, mortars can be mixed by hand or machine. Since mixing by hand only generates low shear forces, it is best to allow the mixture to mature by leaving it to stand for 5 minutes, and then to stir it again.
储存
SILRES® POWDER D should be stored in a cool place and protected against moisture.
The "Best use before end" date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
If the product is stored under pressure, in damaged or fairly long opened packaging, the powder can tend to caking.
Blends of SILRES® POWDER D with hydraulic binders, fillers and pigments have better storage stability because these substances prevent caking. However, blends of this type still have to be protected against humidity.
销售和支持
200233 Shanghai
中国大陆
+86 21 6130-2500 （传真）